Color Decompose Script
This discussion is connected to the gimp-user-list.gnome.org mailing list which is provided by the GIMP developers and not related to gimpusers.com.
This is a read-only list on gimpusers.com so this discussion thread is read-only, too.
| Color Decompose Script | Alan Huntley | 05 Aug 22:48 |
| Color Decompose Script | Pat David | 06 Aug 03:24 |
| Color Decompose Script | Alan Huntley | 06 Aug 13:42 |
| Color Decompose Script | Pat David | 06 Aug 15:45 |
| Color Decompose Script | Alan Huntley | 06 Aug 16:54 |
| Color Decompose Script | Pat David | 09 Aug 14:08 |
| Color Decompose Script | Alan Huntley | 09 Aug 17:04 |
Color Decompose Script
Hello,
New user to GIMP and I just installed the Color Decompose script by patdavid from the registry. When I run it, it seems to be working as expected, but then I get the following error message:
GIMP Message
Execution error for 'Color Decompose': Error: ( : 2) Procedure execution of plug-in-decompose failed.
Then, when I click "OK" I get the following:
GIMP Message
Plug-in 'Color Decompose' left image undo in inconsistent state, closing open undo groups.
Clicking "OK", again, I'm left with the following layers: RGB - Red, RGB - Green, RGB - Blue, HSV - Value, HSL - Lightness, CMYK - K, and LAB - L. So, it seems that the script is doing what it's supposed to. Why the error messages? Can I do something to not get those errors? Running GIMP 2.8.18
Thank you.
Color Decompose Script
Hi Alan!
Could you tell us which script this is and where you got it from?
On Fri, Aug 5, 2016 at 3:49 PM Alan Huntley wrote:
Hello,
New user to GIMP and I just installed the Color Decompose script by patdavid from the registry. When I run it, it seems to be working as expected, but then I get the following error message:
GIMP Message
Execution error for 'Color Decompose': Error: ( : 2) Procedure execution of plug-in-decompose failed.
Then, when I click "OK" I get the following:
GIMP Message
Plug-in 'Color Decompose' left image undo in inconsistent state, closing open undo groups.
Clicking "OK", again, I'm left with the following layers: RGB - Red, RGB - Green, RGB - Blue, HSV - Value, HSL - Lightness, CMYK - K, and LAB - L. So, it seems that the script is doing what it's supposed to. Why the error messages? Can I do something to not get those errors? Running GIMP 2.8.18
Thank you. _______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Pat David https://pixls.us http://blog.patdavid.net
Color Decompose Script
Color Decompose v0.2 downloaded from the GIMP Plugin Registry. I got there by following the link in your "Digital B&W Conversion" article in the Tutorials section of the GIMP website. Following along in the article, I see now that my failing script is not creating the YCrCb layers.
Regards, Alan
On Fri, Aug 5, 2016 at 8:24 PM, Pat David wrote:
Hi Alan!
Could you tell us which script this is and where you got it from?
On Fri, Aug 5, 2016 at 3:49 PM Alan Huntley wrote:
Hello,
New user to GIMP and I just installed the Color Decompose script by patdavid from the registry. When I run it, it seems to be working as expected, but then I get the following error message:
GIMP Message
Execution error for 'Color Decompose': Error: ( : 2) Procedure execution of plug-in-decompose failed.
Then, when I click "OK" I get the following:
GIMP Message
Plug-in 'Color Decompose' left image undo in inconsistent state, closing open undo groups.
Clicking "OK", again, I'm left with the following layers: RGB - Red, RGB -
Green, RGB - Blue, HSV - Value, HSL - Lightness, CMYK - K, and LAB - L. So,
it seems that the script is doing what it's supposed to. Why the error messages? Can I do something to not get those errors? Running GIMP 2.8.18Thank you. _______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list--
Pat David
https://pixls.us
http://blog.patdavid.net
Color Decompose Script
Alan,
Perfect! I will have a look at it soon (I'm currently traveling) and try to get it fixed right up.
Pat
On Sat, Aug 6, 2016 at 6:42 AM Alan Huntley wrote:
Color Decompose v0.2 downloaded from the GIMP Plugin Registry. I got there by following the link in your "Digital B&W Conversion" article in the Tutorials section of the GIMP website. Following along in the article, I see now that my failing script is not creating the YCrCb layers.
Regards, Alan
On Fri, Aug 5, 2016 at 8:24 PM, Pat David wrote:
Hi Alan!
Could you tell us which script this is and where you got it from?
On Fri, Aug 5, 2016 at 3:49 PM Alan Huntley wrote:
Hello,
New user to GIMP and I just installed the Color Decompose script by patdavid from the registry. When I run it, it seems to be working as expected, but then I get the following error message:
GIMP Message
Execution error for 'Color Decompose': Error: ( : 2) Procedure execution of plug-in-decompose failed.
Then, when I click "OK" I get the following:
GIMP Message
Plug-in 'Color Decompose' left image undo in inconsistent state, closing open undo groups.
Clicking "OK", again, I'm left with the following layers: RGB - Red,
RGB
-
Green, RGB - Blue, HSV - Value, HSL - Lightness, CMYK - K, and LAB - L. So,
it seems that the script is doing what it's supposed to. Why the error messages? Can I do something to not get those errors? Running GIMP2.8.18
Thank you.
_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list--
Pat David
https://pixls.us
http://blog.patdavid.net_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Pat David https://pixls.us http://blog.patdavid.net
Color Decompose Script
Pat,
That would be great! Thanks!
Alan
On Sat, Aug 6, 2016 at 8:45 AM, Pat David wrote:
Alan,
Perfect! I will have a look at it soon (I'm currently traveling) and try to get it fixed right up.
Pat
On Sat, Aug 6, 2016 at 6:42 AM Alan Huntley wrote:
Color Decompose v0.2 downloaded from the GIMP Plugin Registry. I got there by following the link in your "Digital B&W Conversion" article in the Tutorials section of the GIMP website. Following along in the article, I see now that my failing script is not creating the YCrCb layers.
Regards, Alan
On Fri, Aug 5, 2016 at 8:24 PM, Pat David wrote:
Hi Alan!
Could you tell us which script this is and where you got it from?
On Fri, Aug 5, 2016 at 3:49 PM Alan Huntley wrote:
Hello,
New user to GIMP and I just installed the Color Decompose script by patdavid from the registry. When I run it, it seems to be working as expected, but then I get the following error message:
GIMP Message
Execution error for 'Color Decompose': Error: ( : 2) Procedure execution of plug-in-decompose failed.
Then, when I click "OK" I get the following:
GIMP Message
Plug-in 'Color Decompose' left image undo in inconsistent state, closing open undo groups.
Clicking "OK", again, I'm left with the following layers: RGB - Red,
RGB
-
Green, RGB - Blue, HSV - Value, HSL - Lightness, CMYK - K, and LAB - L. So,
it seems that the script is doing what it's supposed to. Why the error messages? Can I do something to not get those errors? Running GIMP2.8.18
Thank you.
_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives: https://mail.gnome.org/archives/gimp-user-list
--
Pat David
https://pixls.us
http://blog.patdavid.net_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list--
Pat David
https://pixls.us
http://blog.patdavid.net
Color Decompose Script
Alan,
I've updated the script to work correctly now in 2.8.18. You can find it here:
https://raw.githubusercontent.com/pixlsus/GIMP-Scripts/master/patdavid-color-decompose_0.3.scm
Let me know if it works ok! :D
On Sat, Aug 6, 2016 at 11:55 AM Alan Huntley wrote:
Pat,
That would be great! Thanks!
Alan
On Sat, Aug 6, 2016 at 8:45 AM, Pat David wrote:
Alan,
Perfect! I will have a look at it soon (I'm currently traveling) and try to get it fixed right up.
Pat
On Sat, Aug 6, 2016 at 6:42 AM Alan Huntley wrote:
Color Decompose v0.2 downloaded from the GIMP Plugin Registry. I got
there
by following the link in your "Digital B&W Conversion" article in the Tutorials section of the GIMP website. Following along in the article, I see now that my failing script is not creating the YCrCb layers.
Regards, Alan
On Fri, Aug 5, 2016 at 8:24 PM, Pat David wrote:
Hi Alan!
Could you tell us which script this is and where you got it from?
On Fri, Aug 5, 2016 at 3:49 PM Alan Huntley wrote:
Hello,
New user to GIMP and I just installed the Color Decompose script by patdavid from the registry. When I run it, it seems to be working as expected, but then I get the following error message:
GIMP Message
Execution error for 'Color Decompose': Error: ( : 2) Procedure execution of plug-in-decompose failed.
Then, when I click "OK" I get the following:
GIMP Message
Plug-in 'Color Decompose' left image undo in inconsistent state, closing open undo groups.
Clicking "OK", again, I'm left with the following layers: RGB - Red,
RGB
-
Green, RGB - Blue, HSV - Value, HSL - Lightness, CMYK - K, and LAB -L.
So,
it seems that the script is doing what it's supposed to. Why theerror
messages? Can I do something to not get those errors? Running GIMP
2.8.18
Thank you.
_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives: https://mail.gnome.org/archives/gimp-user-list
--
Pat David
https://pixls.us
http://blog.patdavid.net_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list--
Pat David
https://pixls.us
http://blog.patdavid.net_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Pat David https://pixls.us http://blog.patdavid.net
Color Decompose Script
Pat,
Wow, that was fast! Works like a champ. Thanks!!
Alan
On Tue, Aug 9, 2016 at 7:08 AM, Pat David wrote:
Alan,
I've updated the script to work correctly now in 2.8.18. You can find it here:
https://raw.githubusercontent.com/pixlsus/GIMP-Scripts/ master/patdavid-color-decompose_0.3.scm
Let me know if it works ok! :D
On Sat, Aug 6, 2016 at 11:55 AM Alan Huntley wrote:
Pat,
That would be great! Thanks!
Alan
On Sat, Aug 6, 2016 at 8:45 AM, Pat David wrote:
Alan,
Perfect! I will have a look at it soon (I'm currently traveling) and try to get it fixed right up.
Pat
On Sat, Aug 6, 2016 at 6:42 AM Alan Huntley wrote:
Color Decompose v0.2 downloaded from the GIMP Plugin Registry. I got
there
by following the link in your "Digital B&W Conversion" article in the Tutorials section of the GIMP website. Following along in the article,
I
see now that my failing script is not creating the YCrCb layers.
Regards, Alan
On Fri, Aug 5, 2016 at 8:24 PM, Pat David wrote:
Hi Alan!
Could you tell us which script this is and where you got it from?
On Fri, Aug 5, 2016 at 3:49 PM Alan Huntley
wrote:
Hello,
New user to GIMP and I just installed the Color Decompose script by patdavid from the registry. When I run it, it seems to be working as expected, but then I get the following error message:
GIMP Message
Execution error for 'Color Decompose': Error: ( : 2) Procedure execution of plug-in-decompose failed.
Then, when I click "OK" I get the following:
GIMP Message
Plug-in 'Color Decompose' left image undo in inconsistent state, closing open undo groups.
Clicking "OK", again, I'm left with the following layers: RGB -
Red,
RGB
-
Green, RGB - Blue, HSV - Value, HSL - Lightness, CMYK - K, and LAB- L.
So,
it seems that the script is doing what it's supposed to. Why theerror
messages? Can I do something to not get those errors? Running GIMP
2.8.18
Thank you.
_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives: https://mail.gnome.org/archives/gimp-user-list
--
Pat David
https://pixls.us
http://blog.patdavid.net_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives: https://mail.gnome.org/archives/gimp-user-list
--
Pat David
https://pixls.us
http://blog.patdavid.net_______________________________________________ gimp-user-list mailing list
List address: gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list--
Pat David
https://pixls.us
http://blog.patdavid.net
