Problem with exported tiffs
This discussion is connected to the gimp-developer-list.gnome.org mailing list which is provided by the GIMP developers and not related to gimpusers.com.
This is a read-only list on gimpusers.com so this discussion thread is read-only, too.
Problem with exported tiffs | Hans Petter Birkeland | 31 Jan 19:46 |
Fwd: Problem with exported tiffs | Hans Petter Birkeland | 31 Jan 19:49 |
Problem with exported tiffs | Paka | 31 Jan 19:50 |
Problem with exported tiffs | Hans Petter Birkeland | 31 Jan 19:52 |
Problem with exported tiffs | Paka | 31 Jan 20:07 |
Problem with exported tiffs | Hans Petter Birkeland | 31 Jan 20:09 |
Problem with exported tiffs | Paka | 31 Jan 20:45 |
Problem with exported tiffs | Hans Petter Birkeland | 31 Jan 20:51 |
Problem with exported tiffs
Hi,
I have been using GIMP 2.9.x on Linux Mint for a long time, mostly without
any problems. Today however, I exported a 16 bit tif file and imported it
into Darktable, just like I have done dozens of times before. I was able to
import it, but after I quit Darktable it will not open again. Starting
Darktable from terminal gives the following:
----
TIFFFetchNormalTag: Incorrect count for "XPosition"; tag ignored.
TIFFFetchNormalTag: Incorrect count for "YPosition"; tag ignored.
darktable: magick/error.c:911: ThrowLoggedException: Assertion `exception
!= (ExceptionInfo *) ((void *)0)' failed.
Avbrutt (SIGABRT)
-----
If I remove the tif file from its folder, Darktable starts as normal. If necessary, the tif file can be downloaded here:
So it seems like there is a problem either with the tif export from GIMP or the import into Darktable. My GIMP version is 2.9.3~6-0t0~ppa. Can somebody here tell me if this is a GIMP problem? I'll ask on the Darktable mailing list as well.
Best regards,
Hans Petter Birkeland
Fwd: Problem with exported tiffs
Sorry, forgot the link to the tiff file: https://drive.google.com/file/d/0BzpnpCT3vxbdbG1QOFl1YmRXcTQ/view?usp=sharing
---------- Forwarded message ----------
From: Hans Petter Birkeland
Date: 2016-01-31 20:46 GMT+01:00
Subject: Problem with exported tiffs
To: gimp-developer
Hi,
I have been using GIMP 2.9.x on Linux Mint for a long time, mostly without
any problems. Today however, I exported a 16 bit tif file and imported it
into Darktable, just like I have done dozens of times before. I was able to
import it, but after I quit Darktable it will not open again. Starting
Darktable from terminal gives the following:
----
TIFFFetchNormalTag: Incorrect count for "XPosition"; tag ignored.
TIFFFetchNormalTag: Incorrect count for "YPosition"; tag ignored.
darktable: magick/error.c:911: ThrowLoggedException: Assertion `exception
!= (ExceptionInfo *) ((void *)0)' failed.
Avbrutt (SIGABRT)
-----
If I remove the tif file from its folder, Darktable starts as normal. If necessary, the tif file can be downloaded here:
So it seems like there is a problem either with the tif export from GIMP or the import into Darktable. My GIMP version is 2.9.3~6-0t0~ppa. Can somebody here tell me if this is a GIMP problem? I'll ask on the Darktable mailing list as well.
Best regards,
Hans Petter Birkeland
Problem with exported tiffs
* Hans Petter Birkeland [01-31-16 14:48]:
Hi,
I have been using GIMP 2.9.x on Linux Mint for a long time, mostly without any problems. Today however, I exported a 16 bit tif file and imported it into Darktable, just like I have done dozens of times before. I was able to import it, but after I quit Darktable it will not open again. Starting Darktable from terminal gives the following:---- TIFFFetchNormalTag: Incorrect count for "XPosition"; tag ignored. TIFFFetchNormalTag: Incorrect count for "YPosition"; tag ignored. darktable: magick/error.c:911: ThrowLoggedException: Assertion `exception != (ExceptionInfo *) ((void *)0)' failed. Avbrutt (SIGABRT)
-----If I remove the tif file from its folder, Darktable starts as normal. If necessary, the tif file can be downloaded here:
So it seems like there is a problem either with the tif export from GIMP or the import into Darktable. My GIMP version is 2.9.3~6-0t0~ppa. Can somebody here tell me if this is a GIMP problem? I'll ask on the Darktable mailing list as well.
I am willing to try with dt, but cannot find the file at "here: "
(paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net
Problem with exported tiffs
No, I forgot it. Sendt it right afterwards, but here it is again: https://drive.google.com/file/d/0BzpnpCT3vxbdbG1QOFl1YmRXcTQ/view?usp=sharing
2016-01-31 20:50 GMT+01:00 Paka :
* Hans Petter Birkeland [01-31-16 14:48]:
Hi,
I have been using GIMP 2.9.x on Linux Mint for a long time, mostlywithout
any problems. Today however, I exported a 16 bit tif file and imported it into Darktable, just like I have done dozens of times before. I was able
to
import it, but after I quit Darktable it will not open again. Starting Darktable from terminal gives the following:
---- TIFFFetchNormalTag: Incorrect count for "XPosition"; tag ignored. TIFFFetchNormalTag: Incorrect count for "YPosition"; tag ignored. darktable: magick/error.c:911: ThrowLoggedException: Assertion `exception != (ExceptionInfo *) ((void *)0)' failed. Avbrutt (SIGABRT)
-----If I remove the tif file from its folder, Darktable starts as normal. If necessary, the tif file can be downloaded here:
So it seems like there is a problem either with the tif export from GIMP
or
the import into Darktable. My GIMP version is 2.9.3~6-0t0~ppa. Can
somebody
here tell me if this is a GIMP problem? I'll ask on the Darktable mailing list as well.
I am willing to try with dt, but cannot find the file at "here: " --
(paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net _______________________________________________ gimp-developer-list mailing list
List address: gimp-developer-list@gnome.org List membership:
https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Problem with exported tiffs
* Hans Petter Birkeland [01-31-16 14:53]: [...]
* Hans Petter Birkeland [01-31-16 14:48]:
Hi,
I have been using GIMP 2.9.x on Linux Mint for a long time, mostlywithout
any problems. Today however, I exported a 16 bit tif file and imported it into Darktable, just like I have done dozens of times before. I was able
to
import it, but after I quit Darktable it will not open again. Starting Darktable from terminal gives the following: ----
TIFFFetchNormalTag: Incorrect count for "XPosition"; tag ignored. TIFFFetchNormalTag: Incorrect count for "YPosition"; tag ignored. darktable: magick/error.c:911: ThrowLoggedException: Assertion `exception != (ExceptionInfo *) ((void *)0)' failed. Avbrutt (SIGABRT)
-----
If I remove the tif file from its folder, Darktable starts as normal. If necessary, the tif file can be downloaded here:So it seems like there is a problem either with the tif export from GIMP
or
the import into Darktable. My GIMP version is 2.9.3~6-0t0~ppa. Can
somebody
here tell me if this is a GIMP problem? I'll ask on the Darktable mailing list as well.
appears to me to be a problem with your dt install. I can import and open it fine and it survives a dt restart.
screenshot: http://wahoo.no-ip.org/~pat/Screenshot_20160131_145509.png
darktable-2.1+git1453745209.7844ded
(paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net
Problem with exported tiffs
Ok, thanks. I'll wait for a reply from the Darktable list as well. 31. jan. 2016 21:07 skrev "Paka" :
* Hans Petter Birkeland [01-31-16 14:53]: [...]
* Hans Petter Birkeland [01-31-16 14:48]:
Hi,
I have been using GIMP 2.9.x on Linux Mint for a long time, mostlywithout
any problems. Today however, I exported a 16 bit tif file and
imported it
into Darktable, just like I have done dozens of times before. I was
able
to
import it, but after I quit Darktable it will not open again.
Starting
Darktable from terminal gives the following: ----
TIFFFetchNormalTag: Incorrect count for "XPosition"; tag ignored. TIFFFetchNormalTag: Incorrect count for "YPosition"; tag ignored. darktable: magick/error.c:911: ThrowLoggedException: Assertion`exception
!= (ExceptionInfo *) ((void *)0)' failed. Avbrutt (SIGABRT)
-----
If I remove the tif file from its folder, Darktable starts asnormal. If
necessary, the tif file can be downloaded here:
So it seems like there is a problem either with the tif export from
GIMP
or
the import into Darktable. My GIMP version is 2.9.3~6-0t0~ppa. Can
somebody
here tell me if this is a GIMP problem? I'll ask on the Darktable
mailing
list as well.
appears to me to be a problem with your dt install. I can import and open it fine and it survives a dt restart.
screenshot: http://wahoo.no-ip.org/~pat/Screenshot_20160131_145509.png
darktable-2.1+git1453745209.7844ded
-- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net _______________________________________________ gimp-developer-list mailing list
List address: gimp-developer-list@gnome.org List membership:
https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Problem with exported tiffs
* Hans Petter Birkeland [01-31-16 15:12]:
Ok, thanks. I'll wait for a reply from the Darktable list as well. 31. jan. 2016 21:07 skrev "Paka" :
* Hans Petter Birkeland [01-31-16 14:53]: [...]
* Hans Petter Birkeland [01-31-16 14:48]:
Hi,
I have been using GIMP 2.9.x on Linux Mint for a long time, mostlywithout
any problems. Today however, I exported a 16 bit tif file and
imported it
into Darktable, just like I have done dozens of times before. I was
able
to
import it, but after I quit Darktable it will not open again.
Starting
Darktable from terminal gives the following: ----
TIFFFetchNormalTag: Incorrect count for "XPosition"; tag ignored. TIFFFetchNormalTag: Incorrect count for "YPosition"; tag ignored. darktable: magick/error.c:911: ThrowLoggedException: Assertion`exception
!= (ExceptionInfo *) ((void *)0)' failed. Avbrutt (SIGABRT)
-----
If I remove the tif file from its folder, Darktable starts asnormal. If
necessary, the tif file can be downloaded here:
So it seems like there is a problem either with the tif export from
GIMP
or
the import into Darktable. My GIMP version is 2.9.3~6-0t0~ppa. Can
somebody
here tell me if this is a GIMP problem? I'll ask on the Darktable
mailing
list as well.
appears to me to be a problem with your dt install. I can import and open it fine and it survives a dt restart.
screenshot: http://wahoo.no-ip.org/~pat/Screenshot_20160131_145509.png
darktable-2.1+git1453745209.7844ded
-- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net _______________________________________________ gimp-developer-list mailing list
List address: gimp-developer-list@gnome.org List membership:
https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list_______________________________________________ gimp-developer-list mailing list
List address: gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
You will probably have better luck talking to your dt packager, ie: it is probably not a dt problem or I would have the same problem.
(paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net
Problem with exported tiffs
Maybe, but you and I don't have the same build. Besides, the packager is on the DT mailing list, so he might drop in anyway. :-)
2016-01-31 21:45 GMT+01:00 Paka :
* Hans Petter Birkeland [01-31-16 15:12]:
Ok, thanks. I'll wait for a reply from the Darktable list as well. 31. jan. 2016 21:07 skrev "Paka" :
* Hans Petter Birkeland [01-31-16 14:53]: [...]
* Hans Petter Birkeland [01-31-16 14:48]:
Hi,
I have been using GIMP 2.9.x on Linux Mint for a long time,mostly
without
any problems. Today however, I exported a 16 bit tif file and
imported it
into Darktable, just like I have done dozens of times before. I
was
able
to
import it, but after I quit Darktable it will not open again.
Starting
Darktable from terminal gives the following: ----
TIFFFetchNormalTag: Incorrect count for "XPosition"; tag ignored. TIFFFetchNormalTag: Incorrect count for "YPosition"; tag ignored. darktable: magick/error.c:911: ThrowLoggedException: Assertion`exception
!= (ExceptionInfo *) ((void *)0)' failed. Avbrutt (SIGABRT)
-----
If I remove the tif file from its folder, Darktable starts asnormal. If
necessary, the tif file can be downloaded here:
So it seems like there is a problem either with the tif export
from
GIMP
or
the import into Darktable. My GIMP version is 2.9.3~6-0t0~ppa.
Can
somebody
here tell me if this is a GIMP problem? I'll ask on the Darktable
mailing
list as well.
appears to me to be a problem with your dt install. I can import and
open
it fine and it survives a dt restart.
screenshot:
http://wahoo.no-ip.org/~pat/Screenshot_20160131_145509.png
darktable-2.1+git1453745209.7844ded
-- (paka)Patrick Shanahan Plainfield, Indiana, USA
@ptilopteri
http://en.opensuse.org openSUSE Community Member
facebook/ptilopteri
http://wahoo.no-ip.org Photo Album:
http://wahoo.no-ip.org/gallery2
Registered Linux User #207535 @
_______________________________________________ gimp-developer-list mailing list
List address: gimp-developer-list@gnome.org List membership:
https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list_______________________________________________ gimp-developer-list mailing list
List address: gimp-developer-list@gnome.org List membership:https://mail.gnome.org/mailman/listinfo/gimp-developer-list
List archives: https://mail.gnome.org/archives/gimp-developer-list
You will probably have better luck talking to your dt packager, ie: it is probably not a dt problem or I would have the same problem.
-- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net _______________________________________________ gimp-developer-list mailing list
List address: gimp-developer-list@gnome.org List membership:
https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list